FGQ-32-52 hydraulic wire rope cutter, mainly by the power source
(with electric and manual pumps are available), operating cylinder,
slide and cutting blades of several major components, it has a
reasonable structure, convenient operation, quick cut , effort,
etc., in particular due to the split structure, thereby
fundamentally avoid the previous careless operation caused by the
rope thrown bombs wounding phenomenon. The cutting machine can not
only cut off φ32-52 mm rope, but also cut φ20 mm below the
specifications garden bar. The cutting machine is a national
initiative, widely used in metallurgy, mining, petroleum, bridges
and other engineering sectors.
|Model||Rated Pressure (Mpa)||Blade stroke (mm)||Maximum cutting force (T)||Dimensions (mm)|
1, A hydraulic pump and a high-pressure hose connection and tighten
the bolt back to the oil.
2, Pull out the active tip, turn rails and wire rope to be cut into
the slot (direct penetration), having a good activity tip.
3, Pushed the handle up and down the blade forward, you can achieve
the cutting operation.
4, Forward movement is completed, unscrew the bolt back to the oil,
the cutter return, ready for the next operation.